Forward Controls Design 6315 Stoner 63 LMG Style Flash Suppressor - 1/2x28

Forward Controls Design are a big fan of the A2 flash suppressor / compensator (compensator is the Army TM 9-1005-319-23&P, Air Force TO 11W3-5-5-42, Navy SW370-BU-MMI-010 designation).  It is inexpensive, and does a decent job of what's asked of it. They went through a phase of expensive and fancy brakes and comps, all of them have worked well but they know they're not practical for defense/duty ARs.  The flash, noise and concussion they produce are the result and byproduct of reducing the felt recoil (brakes) and keeping the muzzle down (comps).

Threaded for 1/2x28, precision machined from solid 4130 or 4140 steel bar stock and black nitrided, it is probably the finest A2 style comp/flash suppressor ever produced.  Its 3 and 9 o'clock ports are 25% smaller (shorter and narrower) than the other three upward facing ports so more gas is vented through the upward facing ports, it is a superior compensator to the A2, its flash suppression is equal to that of an A2.  6315 is compatible with M16 BFA and most A2 mounted sound suppressors.  Note that since 6315 does have flash suppression capability equal to that of an A2, it is to be treated as a flash suppressor for states that feel threatened by them, such as CA, MA and NY.

Since they now have more room in front of the 3 and 9 o'clock ports, they incorporated wire cutter alignment notches ahead of these ports.  The wire cutter notches will probably earn them some flak and endless ribbing about having to cut wires at the range while punching holes on paper, but they always design combat features into their products, they're there, you don't have to use them :)

6315 is a light (2.12oz) and short blended performance muzzle device.  It provides 15 to 20% better muzzle rise compensation than the A2, and what is impressive is that it does so without sacrificing its flash suppression capabilities, or creating more noise and concussion.

The number 63 in its name pays homage to the Stoner 63 light machine gun, the shape of its ports draws heavily from the Stoner 63 LMG's flash suppressor design. 6315 is a part of Forward Controls' x15 muzzle device series.

Be considerate to fellow shooters next to you, use a flash suppressor :)

Your shooting buddies will enjoy shooting next to you much more once you replace the brake or comp with something that won't remind them of their days in artillery, that it also agitates the snowflakes is priceless.

A crush washer is included.

Proudly designed and made in USA.

Please NOTE:

• 6315 is 0.04 longer than the TDP A2 compensator, and will not work with the B&T A2 mounted RBS sound suppressor without modification / removal of 0.04 of length from the front of the 6315.
• 6315 has wrench flats for torqueing it on the barrel.  Do not use a screwdriver and insert it into one of its ports to torque it.  With 30ft lbs of torque, using a rod or screw driver will cause damage to the muzzle device.
• JMW (Joint Muzzle device Wrench) was designed specifically for use on suppressor mounts.
• Screw driver not included (but seriously, use a 3/4 wrench, armorer's wrench, or JMW, not a screw driver.)