Forward Controls Design OPF Optics Platform for Glock Gen 5 MOS – Acro
Optic Mount
In stock
Only 3 left
Forward Controls Design OPF Optics Platform for Glock Gen 5 MOS – Acro
$68.87
PLEASE NOTE:
Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO. Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats.
OPF-G, ACRO is only guaranteed to work with Aimpoint ACRO P1 and P2, and Steiner's MPS. We have not tested it with the cheap Chicom sights under different guises from various companies that purportedly use the ACRO footprint. We neither endorse, nor support their use on OPF-G, ACRO. For defense and duty, we also do not recommend P2 copies.
OPF-G, ACRO will only fit GLOCK MOS slides.
OPF-G, ACRO (Optics Platform, GLOCK, for RMR) is a GLOCK MOS Adapter Set 01 compatible plate for mounting Aimpoint's ACRO P1 and P2 on GLOCK Gen 4 and Gen 5 slides, G17, G19, G20, G21, G22, G23, G26, G40, G45, G47, G49, G34, G35, G41 (width 25mm/1 inch.), and G40.
Forward Controls Design likes the GLOCK MOS concept, even if they find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. GLOCK's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability.
OPF-G, ACRO is machined in 4140 steel and Melonite coated. For a short time, OPF-G, ACRO will have both our Cygnus logo, and Tangodown's logo in tandem.
Torque value for plate to slide: 13 in·lb.
Torque value for ACRO P1/P2 mounting screw: 26 in·lb.
Proudly designed and made in the USA.
SKU | OPF-G-ACRO |
---|---|
Product Type | Optic Mount |
Manufacturer | Forward Controls Design |
Optic Footprint | Aimpoint Acro |