Forward Controls Design OPF Optics Platform for Glock Gen 5 MOS – EOTech EFLX

OPF-G, EFLX (Optics Platform, Forward Controls, EFLX ) is compatible with EOTech's new EFLX sight.  OPF-G, EFLX uses the same proven design of the OPF-G, RMR to keep the EFLX  immobile, the simplest and most effective way to prevent sight to plate mounting screws from loosening and shearing.

While EFLX uses 4 recoil lugs (twice as that of the RMR's) and beefier mounting screws, the challenges of keeping the sight on the plate without loosening or shearing the sight to plate screws are not very different from those of the RMR.  OPF-G, EFLX has a front and rear fence, the tight tolerances of the plate to slide, and sight to plate insures minimum movement along the bore in recoil.

Torque value:

• Plate to slide: 13in/lbs
• Sight to plate: 20 to 25 in/lbs

EFLX requires backup sight sets with at least 0.365 front sight height. Sight sets with 0.365" will be very low in the EFLX sight window, with only the top of the sights visible.  Sight sets with 0.407" will be easier to use.

OPF-G, EFLX ships with 2 plate to slide screws (M3 0.5mm x 6mm), a T10 wrench, and a packet of VC-3.  A torque wrench is necessary to properly install both the plate to slide, and sight to plate screws.

Billet machined in 4140, hat treated and black nitride coated.

Please NOTE:

• OPF-G, EFLX is compatible with GLOCKs that use GLOCK's G17, G20, G21 G22, G23, G26, G34, G40, G45 and G47.
• OPF-G, EFLX is compatible with the Leupold's Delta Point Pro.  DPP sight to plates are longer, while EFLX uses shorter screws.
• OPF-G, EFLX comes with plate to slide mounting screws, but not the sight to plate screws that will with EFLX sigh
• OPF-G, EFLX comes with plate to slide mounting screws, but not the sight to plate screws that will with EFLX sight.