JMAC Customs RRD-360-28F-KM KeyMount Suppressor Mount - 1/2x28

This FaceMount device is designed specifically for firearms that lack the shoulder to properly index a standard muzzle device against. This muzzle device is perfect for Kalashnikov pattern firearms with a gas block near the threads or a barrel with threads longer than 0.625" such as the 5.56 Galil ACE. 

The RRD-360 Muzzle Device from JMAC Customs is unlike others on the market today. This device vents gasses 360 degrees away from your muzzle requiring less effort from the shooter to manage recoil. The use of additional, smaller ports, allows the gasses to disperse in a less concentrated pattern which reduces flash and concussion when compared to a standard muzzle brake. Due to the 360 design, this device does not require timing which makes installation much more simple and does not require shims or crush washer. 

What makes the 360 unique?

• 3 layers of protection for your suppressor
• No timing / shims not required
• Lightweight
• Minimal added length
• Compatible with dozens of suppressors
• Reduced Recoil

 Specifications:

• 1/2x28 Barrel Threads
• 2.050" long (adds approx 1.50")
• 10mm Bore
• KeyMount and KeyMicro Compatible
• 17-4ph Stainless
• Black Nitride
• Facemount

Please NOTE:

• Not intended or recommend for barrels shorter than 10.5” 
• When testing these devices, they found that high rates of fire such as full auto or “mag dumps” could cause damage to the device due to the excess heat, pressure, and gasses from unburnt powder on shorter barrels.
• This device is designed to be tightened against the face of the barrel. If timing is required, you must use their face shims (optional) or your barrel MUST be faced  to properly time this muzzle device.
• JMac Customs is NOT responsible for improper installation of this muzzle device or any damage to the suppressor using this device. They recommend this be professionally installed and checked to ensure alignment.
• JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Contact them if you have any questions or need a recommendation for professional installation. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product.