Patriot Ordnance Factory (POF) Rogue .308 Rifle - 16.5"

Project “Rogue” was an exercise to turn the Revolution platform into the lightest .308 semi auto rifle on the market, and to do it without needless “lightening” cuts. All while delivering a rifle at a price point affordable to serious shooters.

The result is a sub 6 pound .308 rifle packed with proprietary and patented innovations. Thanks to its ridiculously light weight, never before has a semi auto .308 been a more realistic option to carry in the field, no matter how far the journey.

The Rogue features a stylized forged receiver set, stainless steel match grade barrel, KeyLock DI BCG, ambidextrous selector, multiple QD sling attachment points, and Renegade rail & oversized heatsink barrel nut, all topped off with our Micro B muzzle brake.

PROPRIETARY TECHNOLOGY & FEATURES:

E2 DUAL-EXTRACTION TECHNOLOGY

POF-USA’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.

ANTI-TILT BUFFER TUBE

POF mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes.

RENEGADE FOREND

Complete modularity of the Rogue is achieved by the 11” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and your new Rogue rifle is ready to defend, compete, or hunt.

OVERSIZED HEAT SINK BARREL NUT

The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. Our barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. Our enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.

DROP IN TRIGGER SYSTEM

This single-stage, non-adjustable, drop-in trigger boasts a solid 4.5-pound pull weight and is pre-assembled in Hardcoat Anodized aluminum housing (complete with rubber urethane feet) for immediate competition, hunting, and tactical applications right out of the box. Carved from American A2 steel, the Trigger, Disconnect, and Hammer are all Nitride Heat-Treated to 70 Rockwell case hardness for ultimate strength and corrosion resistance. Features custom-fit stainless steel KNS Precision™ Anti-walk Pins.

KEY-LOCK DI BOLT CARRIER GROUP

POF Keylock Bolt Carrier Group is comprised of a Nitride heat treated carrier and stainless steel gas key. The gas key is secured with a staked screw and dove tailed into the carrier for an extremely rigid design. This design helps reduce carrier tilt. It features a nickel plated bolt & extractor, and chrome plated firing pin. The finishes are both corrosion resistant and introduce lubricous characteristics to the action.

ROLLER CAM PIN

POF patented roller cam pin is just one more example of how we strive to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF-USA’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.

Specifications:

• Caliber: .308Win
• Barrel Length:  16.5"
• Rail Length: 11" Renegade Rail
• Weight: 5.9lbs
• Length (Collapsed): 34"