Made from high strength 17-4 stainless, heat treated to H900 and then nitrided with a QPQ process for extremely high corrosion resistance.  The combination of the material, the heat treat process and the hard coating enable Badlands to withstand full auto fire.

While a 3-Prong flash hider is not a new concept, what is unique about the Badlands flash hider is its intricate internal ribbing. This design disrupts unburnt gunpowder and gasses expelled when the bullet leaves the barrel, thereby reducing the amount of combustion occurring outside the muzzle device.  

Badlands is offered in two models, differentiated only by the direct thread offering. Choose 1/2"-28 or 5/8"-24. Either is suitable for calibers ranging from .223 up through .354. So whether you are shooting .223/5.56, a PCC in 9mm, 300 Blackout, 6.5 Grendel, 6.5 Creedmoor, .308, or even 338 Federal, Badlands is going to work for your application. 

Specifications:

• .88" Outside Diameter 
• 2.1" length
• Weight 2.3 ounces  

Installation:

They recommend 1-2 drops of Rocksett. Rocksett has a very high temperature resistance (up to ~2,000 degrees) but its breakaway torque is relatively low (which is nice if you ever decide you want to remove the device).  It really only takes 1-2 drops so don't go heavy with it. If Rocksett sold small once-time use packets they would have included one with Badlands, but they don't. So, they linked to a bottle of Rocksett you can find at Brownells, which should last you years.  It's a good addition to the work bench if you don't have some already.